Browse Catalogue

Select Currency:

 

 







ULTRA NT SCIF Barrier (Solid) - 500 sq ft
TVM ULTRA NT SCIF Barrier (Solid) - 500 sq ft
Ultra NT SCIF Barrier is a heavy duty radiant barrier sheet made up of a single layer of woven polyethylene material bonded to - and sandwiched between - two highly reflective metalized surfaces. ...read more
MSRP Price: $201.00
Our Price: $181.00 You SAVE $20.00
Quantity:
Available
Add to Cart

ULTRA NT SCIF Barrier (Solid) is an metalized foil based radiant barrier comprised of two reflective surfaces, sandwiched around a high-strength reinforcing scrim. Ultra NT SCIF Barrier is fully compliant with Sensitive Compartmented Information Facility (SCIF) applications, and provides an effective attenuation barrier against a wide range of RF frequencies. In addition to being highly durable, Ultra NT SCIF Barrier is flexible, lightweight, and easily installed in many different building types.

Features

  • Made with highly reflective radiant barriers
  • Thermal performance unaffected by moisture
  • Durable and flexible polyethylene core
  • Reflects up to 94% of radiant heat
  • Unrolls and cuts easily
  • Increases existing insulation performance  
  • 48" x 125'

What Is Ultra NT SCIF Barrier?

Ultra NT SCIF Barrier is a heavy duty radiant barrier sheet made up of a single layer of woven polyethylene material bonded to - and sandwiched between - two highly reflective metalized surfaces. Ultra NT SCIF Barrier is used in SCIF (Sensitive Compartmented Information Facilities) - a special facility for handling sensitive data. Ultra NT Radiant Barrier is also an approved vapor barrier.

Ultra NT SCIF Barrier has successfully been used in SCIF applications for sound attenuation and RF frequency shielding. Ultra NT SCIF Barrier is easy to install and manufactured of non-harmful components.

What is SCI and SCIF?

SCI (Sensitive Compartmented Information) - information and materials that require special controls for restricted handling within compartmented intelligence systems and for which compartmentation is established.

SCIF (Sensitive Compartmented Information Facility) - A term used by the Department of Defense for a secure room or data center that inhibits electronic surveillance and suppresses data leakage.

Ultra NT SCIF Barrier *Installation Instructions

The Radio Frequency Shielding application is highly specialized. We provide the following instructions only as a guide. Please consult the architect for correct application for any project.

  1. Please unroll the Ultra NT SCIF Barrier product and cut it to appropriate lengths to cover all walls, ceilings, and floors of a room or building that you want shielded from RF transmission.
    1. If the building is made of wood framing, you can staple the product to the wood directly – stapling every 6-10 inches.
    2. If the building is made of concrete, than you can use a general purpose construction adhesive to attach the product to the concrete wall. A bead of adhesive at 1 foot intervals should be sufficient to hold the product in place.
    3. In some cases, the Ultra NT SCIF Barrier must be installed between two layers of 5/8” gypsum board – please consult with the architect to be sure.
  2. Make sure to overlap all Ultra NT SCIF Barrier joints by 6” and then use an aluminum foil tape to seal all seams.
  3. When you reach the top of a wall, extend the Ultra NT SCIF Barrier so that it extends around the corner and onto the ceiling for 6 inches.
  4. When you reach the bottom of a wall, extend the Ultra NT SCIF Barrier so that it extends onto the floor by 6 inches.
  5. Install more Ultra NT SCIF Barrier material on the ceiling and the floor to complete the job.

*The installation guidelines shown above are for informational purposes only and are not intended to supersede any Architectural specifications. The Architectural specifications for any job shall override the information presented on this installation sheet with regards to appropiate products to use and the appropiate method to use for that particular

 

PHYSICAL PROPERTIES
TEST
SCRIM REFLECTIVE
NOMINAL THICKNESS
--
0.012"
WEIGHT
--
155 g/m22 (0.52 oz/sq.ft.)
TEMPERATURE RANGE
ASTM C411
-60ºF to 190ºF (-51oC to 88o C)
FIRE RATING
ASTM E84
CLASS 2 / CLASS B
TENSILE STRENGTH - MD
ASTM D882
54.0 lbs/inch
TENSILE STRENGTH - CD
ASTM D882
52.6 lbs/inch
PLIABILITY
CAN/CGSB 51.33
No Cracking
WATER VAPOUR PERMEABILITY
ASTM E96
<0.02 Perms
RESISTANCE TO FUNGI & BACTERIA
ASTM C1338
DOES NOT PROMOTE GROWTH
EMMISSIVITY
ASTM C1371
0.03



Sheilding Effectiveness - Test Standard IEEE-299 / ASTM D4935
*Test results for Ultra NT SCIF Barrier 1800-48-125S solid product only.

 

FREQUENCY (MHz)
Horizontal Calibration Signal (watts)
Horizontal Signal Meausrement (watts)
Horizontal Shielded Effectiveness
100
51.4
42 picowatts
49.7%
400
2.1 microwatts
6.3 picowatts
68.8%
800
2.1 microwats
1.8 picowatts
75.6%
1,000
2.0 microwatts
620 femtowatts
81.3%
5,000
2.0 microwatts
75 picowatts
55.3%
10,000
20 microwatts
167 picowatts
56.4%

 

FREQUENCY (MHz)
Vertical Calibration Signal (watts)
Vertical Signal Measurement (watts)
Vertical Shielded Effectiveness
100
51.4 nanowatts
46 picowatts
47.8%
400
2.1 microwatts
1.7 picowatts
75.8%
800
2.0 microwatts
2.7 picowatts
73.4%
1,000
2.0 microwatts
3.0 picowatts
72.9%
5,000
21 microwatts
25 picowatts
61.4%
10,000
21 microwatts
240 picowatts
d54.7%

 Tectererereadf   dddddddadadsfadsf

Technical Data, MSDS and Install Sheet available

Recently Viewed